bags|belts|filters

This is the washable filter for ALL Dyson DC24 models only.  This filter is located directly underneath of the dust bin when it has been removed from the vacuum. You can find the filter by finding where the air is being exhausted. This filter should be replaced at least every 3-6 months. If you notice that your Dyson has lost some of the suction since you've had it, cleaning the filter should be the first place to start.

• Filter removal step 1

  Turn power off and unplug the

• machine.

• 
  To remove the washable filter, remove the clear bin
• and cyclone top from your machine by pressing the cyclone release
• button.
   
  

  Filter removal step 2

  Lift the filter
• release catch to remove the filter from the machine.
   
• 
  

  Filter washing

  Soak the filter in cold water
• for at least 5 minutes. Please do not use detergent on the filter, or
• wash the filter in a dishwasher or in a washing machine .
  After 5 minutes rinse the filter under cold running water and
• squeeze gently, repeating until the water runs clear.
  Leave the filter to dry in a warm place for 12 hours, until
• completely dry.
  Do not dry the filter inside a clothing dryer, hair dryer, microwave
• the filter, place the filter in an oven, or near a naked flame.
   
• 

• The filter should be washed at least once every 3-6 months.

  Replacing the filter

  Turn power off and unplug the

• machine.

• 
  Make sure the filter is completely dry before replacing in the
• machine.
  Replace the filter into the base of the machine and close the filter
• release catch.
  Re-assemble and test the machine.
   
• 
• 
  
  

This is a Dyson DC24 washable lifetime filter which is useful to have an extra filter too replace your filter while it's being washed. Filters particles as small as cigarette smoke. Filter should be washed at least once every six months.
Fits with Dyson DC24 models only
Filter should be washed at least once every six months.
Fits OEM Part Number: 913788-01