This is a washable and reusable foam filter designed to fit the Shark SV800 2-in-1 Cordless Stick Vacuum, including Shark SV800 N 54. Replaces Shark Part numbers are XF800W. There is one filter in each pack. Designed and Developed in the USA by Crucial Vacuum. We suggest that you regularly clean the filter to ensure your vacuum lives a long and healthy life. A dirty filter will result in poor suction. We recommend cleaning the filter each time the battery fully runs down.
Directions Cleaning the Filter:
Turn off your SV800 Shark vacuum cleaner and remove the dust cup by pressing up on the dust cup release button. Pull the filter frame out from your SV800 dust cup bin and remove the foam filter from inside. Rinse the filter in lukewarm water and squeeze the water out. Let it air dry for 24-48 hours. When the foam filter is completely dry, reinsert it into the filter frame and put the frame back into the top of the dust cup cover.
Note: Do not operate cleaner without filter and do not operate cleaner with a wet or damp filter. Please ensure filter is completely dry before replacing, we recommend drying for 24-48 hours. You should always replace your filter if it begins to deteriorate or will not wash clean. All vacuum brand and model names are registered trademarks of vacuum manufacturers.
This is a generic product designed and engineered in the United States by Crucial Vacuum. This is not a Shark® OEM product and is not covered under any Shark® manufacturer's warranty. The Shark® brand names and logos are the registered trademarks of their respective owners. Any use of the Shark® brand name or model designation for this product is made solely for purposes of demonstrating compatibility.